SDKManager Common Issues

Q: Flash failed with t186ref

A: Reduce the USB Devices connected to the Host Machine.

During the flash process, the NRU-120S will be powered by the Host Machine via microUSB cable. So please make sure that the host machine didn’t connect any power-consuming devices, e.g., USB drive, external 2.5” SSD via USB.

Q: SDKManager GUI Launch Failed

A: Try to Clean Cache

rm -r ~/.nvsdkm/

Q: Flashing Jetson AGX Xavier Module 8GB

A: Remember to Change to "jetson-xavier-8gb.conf"

The SDKManager GUI detected the AGX 8GB as Xavier NX module, which leads to failed flash with SDKManager GUI.

A workaround is to flash by the command line. For example.

NRU_DTS=NRU_JetPack4.4_v1.1

cd $L4T
time sudo ./flash.sh -r -d $NRU_DTS.dtb jetson-xavier-8gb mmcblk0p1